powerchute business edition smart ups c1500 driver

The default, indicated by a dimly lit LED, is medium sensitivity. On a tower UPS model, there's a green LED and a small button (often grey in color) near the LED on the unit's back panel. If you haven't already, you could try adjusting the UPS's sensitivity setting. What is your Smart-UPS 2200's exact model number? There have been a few different models sold under that name. I have an older PC from 1998, but it issues a series of beeps when I turn it on and won't boot. What type of cable is a 940-0024 serial cable? It's it a straight serial cable or like a null modem crossover cable? It may be a moot point, as none of our current desktop computers have serial ports. The problem is low voltage causing the AVR Boost to keep toggling constantly. We have a clean sinewave of under 5% THD from the genset. The problem isn't a power quality issue though. So I set it back to normal/high sensitivity. However, the relay cutover time increases to about 1/2 second and half the computers in the office rebooted when a line quality issue caused the UPS to kick in. I also tried turning down the sensitivity. I've tried both Business and Personal Editions. I don't have access to the rear of the UPS, so I reached in with a mirror and flashlight and read (hopefully accurately) the sticker on the back. I could not get through the installation because, like with the other version, even though Windows detected the UPS hardware and installed its own drivers, PowerChute did not detect a UPS.ĩ0 minutes of online research and no successful solutions.įailing at this, I'm planning to modify the generator so that it puts out 120 vac, as I can't seem to make this UPS happy at 111 vac. Initially, I installed PowerChute Business Edition, all three modules, but it could not find a UPS, despite Windows 7 installing drivers for a battery backup unit it found when I plugged the USB cable into the laptop.Īfter an hour of frustration, I rolled back the laptop to a prior restore point and downloaded PowerChute Personal Edition. I bought a special USB cable to do this, and put my Windows 7 laptop to the task. On a generator forum, I was told to download PowerChute and reprogram the thresholds for the UPS so it doesn't keep toggling AVR at the generator voltage. The relay switching is causing computers to reboot at random.

Our SmartUPS 2200 is going into AVR frequently. Manufacturer won't do anything to correct it as it's within the 108-132 vac tolerance range they specify. We have a new genset and it's no load voltage is only 111 vac.

This was originally posted on APC forums on

Elektrik Tasarım Dağıtım ve Uygulama Çözümleri.Motorabgangstechnik & Antriebstechnik Forum.Level and Pressure Instrumentation Forum.EcoStruxure Automation Expert / IEC 61499 Forum.APC UPS Data Center Backup Solutions Forum.APC UPS, Critical Power, Cooling and Racks.

Powerchute business edition smart ups c1500 driver